CDI Traxall X200 User Manual page 11

Inspect O-Rings
Ensure O-ring is serviceable.
A bri le and/or deformed O-ring may
not properly seal.
If in doubt, replace it.*
Lubricate O-ring with a light coa ng of high-temperature grease
(such as Dow Corning MOLYKOTE® 44) Corning MOLYKOTE® 44)
Carefully replace O-ring over threads
and onto its groove.
* Available from CDI (see pg. 29)
TRAXALL X200 Series Mul frequency Transmi er User Guide
Page 11 of 32
s