CDI Traxall X200 User Manual page 21

TRANSMITTER BEHAVIOR
Frequency
Use the drop-down menu to select specifi c transmi er
Transmi er 1–7
Legacy
Power
Duty Cycle
Sliding scale to adjust Ba ery Life vs Eff ec ve Range. For example,
on a long run with a rela vely shallow pipe, ba ery life is likely
to be more important than signal strength. Conversely, signal
strength would likely be more important where the pipe is deep
pipe and the run rela vely short.
Mode
Constant
Pulse
PULSE PROGRAMMING*
On Time Width
Off Time Width
Selectable dura on of on and off cycles
On Pulse Repeat
Off Pulse Repeat
Selectable number of on and off cycles to repeat
TRANSMITTER CONFIGURATION
Ba ery Type
Indicates Alkaline or Lithium ba eries in transmi er
Ba ery Confi g
Indicates ba ery quan ty and type (AA, C, D, etc)
Ba ery Voltage
Indicates current ba ery voltage
Firmware Revision
Indicates transmi er fi rmware
STATUS BAR
Applica on Status
Displays current state of Confi gurator applica on
Time
Local me-of-day
* See APPENDIX A, pg. 27, for Transmi er Behavior and Pulse Characteris cs details.
TRAXALL X200 Series Mul frequency Transmi er User Guide
Page 21 of 32