Bandai Namco GALAGA ASSAULT Setup And Operation Manual page 7

Check Electrical Settings
1. Verify the voltage in the nearest AC outlet.
2. Verify the AC outlet ground connection is present and working.
3. Open the lower back door of the cabinet assembly.
4. Route the line cord so that the plug is near the AC outlet.
5. Replace the lower back door of the cabinet assembly.
Startup Game
1. Plug in line cord to AC outlet.
2. Turn the power switch to ON.
3. Check that no component is excessively hot or emitting foul odors.
If not, turn off AC power and disconnect line cord. Refer to the diagnostic section of this manual.
Diagnostics and Adjustments
The Service Button Panel has four buttons, three of which can navigate the menu system.
But it is easiest to navigate with the Start button and joystick.
TEST button enters diagnostic system. IMPORTANT NOTE: You must hold down the TEST button
for at least 2 seconds to Enter the Test Menu.

Either Start/Fire button or TEST button selects the highlighted option

VOL DOWN button moves down through menu or setting choices.

VOL UP button moves up through menu or setting choices.

Service Button adds a single credit for each press during attract mode and returns to previous
Test Screen when on Test Mode.
At the bottom of the test menu is a display of your game's critical settings. At the right of each
test menu screen is a brief description of each menu item.
GALAGA ASSAULT ™ & © BANDAI NAMCO ENTERTAINMENT Inc.
TEST
SERVICE
Volume
UP
Volume
DOWN
6