Table of Contents
Advertisement
C. ENHANCED DISPLAY
Please refer to the Enhanced Display Owner's Manual.
NOTE
- Use only SUNRISE recommended parts.
D. FREEWHEEL RELEASE LEVERS &
BRAKE RELEASE LEVERS
(Fig.2-3)
When you need to manually push the power wheelchair,
for example in an emergency, or if batteries fail, you
must disengage the freewheel/brake release levers.
It is recommended to have a person assist you in the
following procedure.
!
WARNING
1. DO NOT disengage freewheel/brake release levers
unless power to the wheelchair is off.
2. Be aware that the power wheelchair will not have
braking ability when levers are released, i.e. there is
nothing restraining the wheelchair from moving.
3. Make sure that the person pushing the power
wheelchair has full control when the freewheel/brake
levers are disengaged.
24
In freewheel position:
(Fig.2)
a) To disengage levers:
Pull lever (B)* toward the back to the neutral position to
disengage levers.
b) To engage levers:
Push lever (B)* towards the front to engage the levers
and return to the drive position.
*There is one lever for each motor.
2
B
NOTE
- For the freewheel position, if levers are difficult to
engage or disengage, rock the wheelchair back and forth
and/or push against the wheelchair while moving the lever.
For brake release:
(Fig.3)
a) To disengage levers:
Rotate both levers toward the outside (C).
b) To engage levers:
Rotate both levers toward the inside (D).
3
C
C
D
D
E. LOCKING OR UNLOCKING THE JOYSTICK
To lock with keypad: R-Net and VR2
•
While the control system is switched on, depress
and hold the on/off button.
•
After 1 second the control system will beep.
Now release the on/off button.
•
Deflect the joystick forward until the control
system beeps.
•
Release the joystick, there will be a long beep.
•
The power wheelchair is now locked.
NOTE
- The following screen will
be displayed the next time the
Control System is switched on.
To unlock with keypad: R-Net and VR2
•
Press the power button to turn the power
wheelchair on.
•
Deflect the joystick forward until the control
system beeps.
•
Deflect the joystick in reverse until the control
system beeps.
•
Release the joystick, there will be a long beep.
•
The power wheelchair is now unlocked.
F. DISPLAY SETTINGS FOR R-NET COLOR MODELS
•
The settings menu is accessed by depressing the
Speed Down and Speed Up buttons simultaneously.
A right joystick deflection will enter the clock
adjustment screen.
Set Time
>
Display Time
<24hr>
Distance
>
Backlight
<100%>
Background
<Blue>
Exit
>
Set time and date:
•
Further joystick deflections are used to set the time
and date.
Set T im e
Dec 9
Sun 13 : 4 6
Exit
•
Once you are done with the settings, just select exit
and move the joystick accordingly.
Set Ti me
Dec 9
Sun 13 : 4 6
Exit
Display time:
•
This sets the format of the time display or turns it off.
•
The options are 12hr, 24hr or Off. Left and right
joystick deflections are used to cycle through
the options.
Set Time
>
Display Time
< 24hr >
Backlight
< 100% >
Background
< Auto >
Exit
>
25
Advertisement
Table of Contents
