VTech ErisStation VCS712 Quick Start Manual page 11

Install the base station
1. Plug one end of the telephone line cord into the TEL LINE jack on the rear of
the base station, and plug the other end into a telephone wall jack.
2. Connect the modular jack power adapter to the base station power jack.
3. Plug the power adapter into an electrical outlet that is not controlled by a wall
switch.
IMPORTANT INFORMATION
• Use only the modular jack power adapter provided with the product.
To order a replacement power adapter, visit our website at
businessphones.vtech.com
• The modular jack power adapter is intended to be correctly oriented in a
vertical or floor mount position. The prongs are not designed to hold the plug
in place if it is plugged into a ceiling, under-the-table, or cabinet outlet.
Install the conference phone battery
• CAUTION: Risk of explosion! Batteries should not be exposed to
excessive heat such as bright sunlight or fire.
• CAUTION: Risk of explosion if battery is replaced by an incorrect
type. Dispose of used batteries according to the instructions.
• Use only the supplied battery.
1. After removing the battery door, plug the battery connector securely into the
socket inside the battery compartment.
2. Place the battery into the battery compartment with the label THIS SIDE UP
facing up.
3. Attach the battery door, and secure it in place with the provided screws.
Connect power to the conference phone
1. Plug the round jack end of the AC adapter into the power jack on the back of
the charging dock.
2. Plug the large end of the AC adapter into a wall outlet not controlled by a
switch.
3. Place the rear connectors of the conference phone into the charging dock.
• The supplied round jack power adapter is designed for use only with the
VCS712 conference phone. It is not designed to power other devices. Do
not connect the supplied round jack power adapter to any other devices.
• The round jack power adapter is intended to be correctly oriented in a
vertical or floor mount position. The prongs are not designed to hold the
plug in place if it is plugged into a ceiling, under-the-table, or cabinet
outlet.
1 (888) 370-2006
or call
11
.