Na-protection according to vde-ar-n 4105, in-plant power generators on the low voltage grid;
for use in in-plant power generators on the medium voltage grid according to bdew;with selectable vector shift detection;with selectable rate of change of freque (46 pages)
Summary of Contents for ZIEHL TR111V
Page 1
ZIEHL industrie – elektronik GmbH + Co KG Daimlerstr.13, 74523 Schwäbisch Hall, Germany + 49 791 504-0, info@ziehl.de, www.ziehl.de Temperature Relays and MINIKA® Mains Monitoring Digital Panelmeters MINIPAN® Switching Relays and Controls Measuring Transducers Grid- and Plant Protection updated: 2017-11-06 / sm...
2 Detailed description As standard, the relay in the TR111V operates according to the closed-current-mode. If a temperature sensor is connected, the relay picks up (11-14 closed = ok). The relay releases in the case of a sensor error. If the temperature at the sensor exceeds the adjusted value, the relay releases.
9 Error search The function of the device can be tested with help of a Pt 100-simulator or with a Pt 100-resistance table. The relay switches at exceeding of the limit, at sensor break or short-circuit. TR111V 12090-0703-02 Page 5 / 8...
Pulse 5/50 ns, f = 5 kHz, t = 15 ms, T = 300 ms SURGE IEC 61000-4-5 ±2 kV IEC 61000-4-2 ± 6 kV contact discharge, ± 8 kV air Electrostatic discharge discharge TR111V 12090-0703-02 Page 6 / 8 www.ziehl.de...
Page 7
Protection class housing / terminals IP 30 / IP20 35 mm standard rail according to EN60715 or screw Attachment mounting mounting M4 (additional bolt not included) Approx. 100 g weight Subject to technical modifications TR111V 12090-0703-02 Page 7 / 8 www.ziehl.de...
4 Plombenlasche / latch for sealing 5 Frontplatteneinsatz / front panel 6 Kennzeichen für unten / position downward 7 Riegel bei Wandbefestigung mit Schrauben. Riegelbohrung ø 4,2 mm / For fixing to wall with screws, ø 4,2 mm TR111V 12090-0703-02 Page 8 / 8 www.ziehl.de...
Need help?
Do you have a question about the TR111V and is the answer not in the manual?
Questions and answers