Commissioning; Tools To Commission The Converter - Siemens SINAMICS G120 Getting Started

Commissioning

4.1

Tools to commission the converter

The following tools are used to commission, troubleshoot and control the inverter, as well as
to backup and transfer the inverter settings.
Operator panels
BOP-2 (Basic Operator Panel) -
for snapping onto the inverter
Two-line display
•
Guided basic
•
commissioning
IOP (Intelligent Operator Panel)
- for snapping onto the inverter
Plain text display
•
Menu-based operation and
•
application wizards
PC tools
Converter with Control Units CU230P-2; CU240B-2; CU240E-2
Getting Started, 04/2014, A5E32885834B AB
For mobile use of the IOP:
IOP handheld with power supply unit and rechargeable batteries as
well as RS232 connection cable
If you are using your own connection cable, carefully note the
maximum permissible length of 5 m.
STARTER
Connected to the inverter via USB port, PROFIBUS or
PROFINET
Download: STARTER
(http://support.automation.siemens.com/WW/view/en/10804985/
130000)
Startdrive
Connected to the inverter via USB port, PROFIBUS or
PROFINET
Download: Startdrive
(http://support.automation.siemens.com/WW/view/en/68034568)
SINAMICS PC Inverter Connection Kit 2
Contains the correct USB cable (3 m) to connect a PC to the
inverter.
Door mounting kit for
IOP/BOP-2
For installation of the
•
BOP-2 or IOP in a
control cabinet door.
Degree of protection
•
with IOP: IP54 or
UL Type 12
Degree of protection
•
with BOP-2: IP55
4
Order number
BOP-2:
6SL3255-0AA00-4CA1
IOP:
6SL3255-0AA00-4JA0
Door mounting kit:
6SL3256-0AP00-0JA0
6SL3255-0AA00-4HA0
STARTER on DVD:
6SL3072-0AA00-0AG0
Startdrive on DVD:
6SL3072-4CA02-1XG0
6SL3255-0AA00-2CA0
35