Siemens SINAMICS G120 Getting Started page 30

Installing
3.3 Installing Control Unit
Default setting 14: Switch over between fieldbus and motorized potentiometer
(MOP) using DI 3
Control Units CU230P-2 and CU240E-2
Selected with
STARTER: Process industry with fieldbus
•
BOP-2: Proc Fb
•
PROFIdrive telegram 20
Default setting 15: Switch over between analog setpoint and motorized
potentiometer (MOP) using DI 3
Control Units CU230P-2 and CU240E-2
Selected with
STARTER: Process industry
•
BOP-2: Proc
•
Fieldbus interface is not active.
30
Fieldbus interface is not active.
Fieldbus interface is not active.
Converter with Control Units CU230P-2; CU240B-2; CU240E-2
Getting Started, 04/2014, A5E32885834B AB