Siemens SINAMICS G120 Getting Started page 27

Factory setting of the CU240E-2
The factory setting of the terminals depends on whether the Control Unit has a PROFIBUS /
PROFINET interface.
Factory setting of the terminals for Control Units without
PROFIBUS interface
Fieldbus interface is not active.
Changing the function of terminals
The function of every color-coded terminal can be set.
In order that you do not have to successively change terminal for terminal, several terminals
can be jointly set using default settings.
Converter with Control Units CU230P-2; CU240B-2; CU240E-2
Getting Started, 04/2014, A5E32885834B AB
Factory setting of the terminals for Control Units with
PROFIBUS interface
The function of the fieldbus interface depends on DI 3.
Installing
3.3 Installing Control Unit
27