Motorola R-2002A Manual page 245

40 RNVM
41 WNVM
42 DTMFON
43 DTMFOFF
-Read non-volatile memory and return to TS. The least-significant bit of the first byte
transmitted shall contain the lock state, 1-active (locked). The next 80 bytes transmitted
shall contain the called-address repertory (10 called-addresses (0-9), 8 bytes each). The first
byte transmitted shall contain the two most-significant digits of called-address 9. The next
~
20 bytes shall contain the registration memory (4 entries of 5 bytes each) in the format
shown below. Each group of
5
bytes shall be transmitted with the most-significant byte
first.
-Receive 101 bytes from the TS iformatted as in TNVM) and
wr~te
them to the non-volatile
memory.
-Activate the DTMF generator with the tones associated with the keycode given in the byte
following the command. Apply DTMF signals to the modulator and DTMF sidetone to the
receive-audio line.
KEY CODES
00-09
CORRESPOND TO 0-9 ON KEYPAD
10 * 15
AUX ALERT
11 # 16 CLR
12 SEND 17
STORE
13 END
18
RECALL
14 LOCK 19
MUTE
-deactivate the DTMF generator.
(
36