Mobile Initiated Test Step Definition - Motorola R-2002A Manual

APPENDIX B
MOBILE INITIATED TEST STEP DEFINITION
The following corresponds to the test step rectangles seen on the mobile initiated sequence test screen, Figure 7. The
first sentence following each number is the help message that will be seen if the cursor is positioned under that test
square on the R2008D/R2010D CRT screen.
CELL ACTIVATED
1. FOCC-system parameter overhead messages sent.
The R2008D/R2010D sends a continuous stream of
system parameter overhead messag.es to the mobile
under test.
TL- Display called address.
3. Voice channel. designation message sent. The
R2008D/R2010D sends a message to the mobile, in-
structing it to tune to a forward voice channel.
5. Power level command sent. A high power level
command is sent by the R2008D/R2010D to the
mobile.
7. Power level and handoff testing, normal conversa-
tion mode. The R2008D/R2010D allows for man-
ual power level testing of the other power levels pos-
sible from the mobile. Handoffs to the four possi-
ble forward voice channels can be made. A SAT
drop test can be performed.
9. TEST COMPLETED.
•
24
MOBILE ACTIVATED
2. Service request accepted with called address. The
R2008D/R2010D accepts the service request mes-
sage, displays the telephone number, the mobile
and serial number from the mobile.
4. SAT accepted. The R2008D/R2010D measures the
SAT returned by the mobile and verifies that it
is
correct.
6. Power level order confirmation accepted. The
R2008D/R2010D has received an order confirma-
tion from the mobile.
8. Mobile terminates RVC. The R2008D/R2010D has
received a termination tone from the unit under
test.