Motorola R-2002A Manual page 228

5) AUTO TEST
The Auto Test Mode enables a technician to test a
cellular radio on as many channels as desired. The
R2008D/R2010D signals the radio under test as in
the sequence tests. Measured values of frequency er-
ror, output power and modulation deviation are d
played for each channel tested, and recorded on
optional printer. The following sections describe h1
to set up and operate the R2008D/R2010D in
1
Auto Test Mode. See figure 12.
0 1-80356A 73
25 PIN CONNECTOR
(TO PRINTER)
R2008D
R2010D
TO
POWER
SUPPLY
CELLULAR
RADIO
50 PIN CONNECTOR
(NO CONNECTION)
('~_j
MOBILE PHONE
CONTROL HEAD
0 RX
0 TX
0 RSSI
AUTO TEST SETUP
FIGURE 12.
13
JUNCTION
BOX