Adjusting Your Ebike; Adjusting Your Seat Height; Adjusting Your Saddle Position - Igo Elite User Manual

Adjusting your Ergofit

Adjusting your seat height

Your seat height should be adjusted properly to ensure you get the most
comfortable ride possible. The seat height is properly adjusted when your
knee has a slight bend when sitting on the saddle with your foot on the pedal
at its lowest position (figure 16.1). The seat height can be adjusted by
loosening the lever on the seat tube clamp figure 16.2. Make sure to
retighten after adjustment .
fig. 16.1
ATTENTION! Ensure that the safety marks for max. height written on the
seat post are not visible when retightening the hex bolt.
ATTENTION! If you can put your feet flat on the ground while seated,
your seat height is too low.

Adjusting your saddle position

You can tilt the saddle to change the seating angle, as well as, slide it
backward or forward (figure 16.3). To adjust the saddle, loosen the nut
located on the underside of the saddle with a wrench (figure 16.4). You will be
able to move the saddle around to suit your preffered riding style. When you
are done adjusting, make sure to retighten the nut.
fig. 16.3
fig. 16.2
fig. 16.4
16