Controls - Igo Elite User Manual

Controls

Turning the ebike ON/OFF
Press and hold the Power Button for 2 seconds to turn the electric system on
or off. The control panel can only be used when the battery is connected to
the ebike. If the system is not used for a duration of 5 minutes, it will shut itself
off to conserve battery.
Selecting the display options
Press the 'SET' button to switch between the different trip functions of the
display. (Odometer, Trip distance, Timer, etc...)
Adjusting the pedal assistance levels
Use the 'PLUS' and 'MINUS' buttons to select the different levels
of pedal assistance. (0 - 8)
Power level 8 gives the strongest assistance from the motor.
In power level 0 the motor does not provide any pedal assistance or throttle
but you will still be able to use the functions of the display.
NOTE: The battery will run out of power quicker when using a higher level of
pedal assistance.
Throttle
Your bike is equipped with an on demand throttle on the left grip.
The throttle can only be used within pedal assist levels 1 though 8.
Level 0 is for conventional non electric riding.
Regardless of the power assist level you select the throttle is capable of
taking you to top speed.
You can use the throttle along with the pedal assist or on its own.
6