Cochlear Baha 5 Quick Manual page 2

Pairing and connecting the sound processor to a supported iPhone
1 Turn on Bluetooth
®
functionality on the
iPhone, iPad or iPod touch.
2 Go to Settings >
General > Accessibility.
Quick guide for iPhone connectivity
Make sure the sound
Cochlear™ Baha® 5 sound processors
processor(s) are turned
off (open the battery
doors) at this point.
Baha 5, Baha 5 Power & Baha 5 SuperPower Sound Processor
Quick guide for iPhone connectivity
Cochlear™ Baha® 5 sound processors
3
Baha 5, Baha 5 Power & Baha 5 SuperPower Sound Processor
3a Baha 5 Sound Processor
and Baha 5 Power Sound Processor
Turn the sound processor(s) on by closing
3
the battery door(s).
3a Baha 5 Sound Processor 3 Baha 5 Sound Processor and
OR
and Baha 5 Power Sound Processor
Baha 5 Power Sound Processor
Turn the sound processor(s) on by closing
Turn the sound processor(s) on
the battery door(s).
by closing the battery door(s).
3b Baha 5 SuperPower
Turn on your sound processor(s) by
OR connecting the battery module (s)
( and ).
1 2
3b Baha 5 SuperPower
Note: When pairing to two sound processors,
Turn on your sound processor(s) by
turn them on simultaneously.
connecting the battery module (s)
Note: When pairing to two sound processors, turn them
( and ).
1 2
on simultaneously
5
Note: When pairing to two sound processors,
4 Select Hearing Aids in the
turn them on simultaneously.
The name of the user along
Accessibility menu.
with the sound processor
model will appear.
5
The name of the user along
with the sound processor
model will appear.
4
1
Select Hearing Aids
Baha 5 SuperPower
in the Accessibility
Turn on your sound
menu.
processor(s) by
— OR —
connecting the
battery module (s)
1
2
2
6
Tap on the name of the user/
sound processor model.
A pairing request will now
appear. Press "Pair" to initiate
the pairing process.
Note: When pairing two sound
processors, there will be two
separate pairing requests. Ensure
that the two sound processors
® , iPad
5 The name of the user along
with the sound processor
model will appear.
6 Tap on the name of the user/
sound processor model.
A pairing request will now
appear. Press "Pair" to
initiate the pairing process.
Note: When pairing two sound
processors, there will be two
separate pairing requests. Ensure
that the two sound processors
4
have been configured as a left and
a right device.
Select Hearing Aids
in the Accessibility
menu.
7 The iPhone, iPad or iPod
touch will now pair to the
sound processor(s) and
automatically connect to
it. A series of 6 beep tones
will be heard, followed by a
ripple tone approximately
20 seconds later (or wait
for 120 seconds to be
certain that the process
has been completed).
6
Tap on the name of the user/
sound processor model.
A pairing request will now
appear. Press "Pair" to initiate
the pairing process.
Note: When pairing for the first time, the sequence also includes an
Note: When pairing two sound
MFi authentication process.
processors, there will be two
separate pairing requests. Ensure
During the process of authentication do not start any streaming to
that the two sound processors
the sound processor(s) after pressing the pairing request.
have been configured as a left
and a right device.
® or iPod ® touch
Page 2 of 4
Page 2 of 4