Varytec Giga Bar LED 240 RGB 30 Degrees User Manual page 32

Operating
Operating mode 'Built-in auto‐
matic show'
Giga Bar LED 240 RGB 30°
32
LED bar
A built-in automatic show can only be activated when the unit is operating in stand-alone
mode or as master in a master / slave combination. This setting is only relevant if the device is
not controlled via DMX.
Press [MODE] repeatedly until the display shows 'Prxx' . Now you can select one of the preprog‐
rammed automatic shows. Use [UP] and [DOWN] to select a value between 'Pr01' and 'Pr21' .
For programmes Pr20 and Pr21 you can set a static colour across all segments (background
colour) or a colour that lights up segment-wise (hopping colour). Press [SETUP] repeatedly until
the display shows '1xxx' (background colour) or '2xxx' (hopping colour), respectively. With
[UP] and [DOWN] you can choose from the following options:
Display
'--r'
'-rg'
'--g'
'-gb'
'--b'
Meaning
Red
Red and green
Green
Green and blue
Blue