Varytec Giga Bar LED 240 RGB 30 Degrees User Manual page 38

Operating
Constant unicoloured pattern
Giga Bar LED 240 RGB 30°
38
LED bar
A constant unicoloured pattern can only be activated when the unit is operating in stand
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press [MODE] repeatedly until the display shows 'Colr' .
Press [SETUP]. With [UP] and [DOWN] you can choose from the following options:
Display
'I--r'
'2-rg'
'3--g'
'4-gb'
'5--b'
'6-rb'
'7rgb'
' OFF'
Meaning
Red
Red and green
Green
Green and blue
Blue
Red and blue
Red and green and blue
LEDs off