Varytec Giga Bar LED 240 RGB 30 Degrees User Manual page 37

Sound control and microphone
sensitivity
A sound controlled automatic show can only be activated when the unit is operating in stand
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press [MODE] repeatedly until the display shows 'SUxx' . This activates a sound controlled auto‐
matic show.
Now you can adjust the sensitivity of the built-in microphone for sound control. Use [UP] and
[DOWN] to select a value between 0 (low sensitivity) and 31 (high sensitivity), the display
shows 'SU00' ... 'SU31' .
Wait about 30 seconds until the display turns dark. Then the settings have been applied. To
return to the parent menu without making changes, press [MODE].
Operating
Giga Bar LED 240 RGB 30°
37
LED bar