Varytec Giga Bar LED 240 RGB 30 Degrees User Manual page 23

DMX indicator
Connections in master/slave
mode
If the indicator is flashing in the DMX mode, no DMX signal is received. Maybe the DMX con‐
troller is not switched on or there is a cabling error. If the indicator lights permanently, the
device receives a valid DMX signal.
When you configure a group of devices in master/slave mode, the first unit will control the
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the first slave device. Then connect the DMX output of the first slave device to
the DMX input of the second slave device and so on.
Starting up
Giga Bar LED 240 RGB 30°
23
LED bar