Varytec Giga Bar LED 240 RGB 30 Degrees User Manual page 33

Display
'-rb'
'rgb'
' OFF'
To adjust the speed of the selected automatic show, press [SETUP] repeatedly until the display
shows 'SPxx' . With [UP] and [DOWN] you can now select a value between 'SP01' (slow) and
'SP99' (fast) as well as 'SPFL' (flash effect).
To adjust the strobe frequency, press [SETUP] repeatedly until the display shows 'FSxx' . With
[UP] and [DOWN] you can now select a value between 'SPFS00' (slow) and 'FS99' (fast).
To adjust the fade speed of the selected automatic show, press [SETUP] repeatedly until the
display shows 'Fdxx' . With [UP] and [DOWN] you can now select a value between 'Fd00' (slow)
and 'Fd99' (fast).
Wait about 30 seconds until the display turns dark. Then the settings have been applied. To
return to the parent menu without making changes, press [MODE].
Meaning
Red and blue
Red and green and blue
LEDs off
Giga Bar LED 240 RGB 30°
LED bar
Operating
33