Beok Controls TOL62A Series Manual

week
1-6period
measure
menu
plus key
VIII. Operation Instruction
1)Power key "
You can turn on/off the thermostat by pressing this key. Also
you can confirm and exit by pressing
completed the setting of every parameter.
2)The increase key"
In the period of programmable mode or manual mode, when you
press the increase/decrease key once, alternate display stops in
the bottom right region and the value of the pre-set temperature
will increase/decrease 0.5°C.It will recover the alternate display
with no operation for 5 seconds.
3)Time setting key
You can adjust the time and week by pressing the key " " hold
for 5 seconds, the. If it is pressed, the hour bit flashes. Then you
can press
complete the setting of hour bit, you can press this key to confirm
and continue the setting of minute and week bit sequently. After
the completion of time, you can press " " to confirm and exit.
4)Mode selection key"
You can select programmable mode or manual mode by pressing
this key. If you press this key and hold for 5seconds, you can enter
to set the time.
5)Locking "
When you press
seconds, the thermostat will be locked/unlocked. When it
is locked, no operation can be carried out until it is unlocked.
6)Mode of period programming
If you press"
you can enter the mode of period programming.
Programming:6-event time and temperature
Key
period
manual
heating on
locking
minus key
"
key when you have
"and the decrease key "
key and key to change its value. When you
"
"and unlocking
and at the same time and hold for 5
"and" "at the same time and hold for 5seconds,
Event Symbol Time
1
06:00
2
08:00
3
11: 30
4
12: 30
5
17: 00
6
22:00
1 08:00
2
23:00
"
Default value
20℃
15℃
15℃
15℃
22℃
15℃
22℃
15℃