Using An S-Air Product - Sony 3-299-549-11(1) Operating Instructions Manual

Playing the connected
component on the system
1
Press FUNCTION repeatedly until
"DMPORT" appears in the front panel
display.
2
Start playback of the connected
component.
The sound and images from the connected
component are played on the system or
connected TV.
For operation details, refer to the operating
instructions of the DIGITAL MEDIA
PORT adapter.
Tip
• When listening to MP3 or other compressed music
using a portable audio source, you can enhance the
sound. Select "A.F.D. STD" for "DEC. MODE"
(page 63) and set the sound mode (page 65) to
"MOVIE", "MUSIC" or "NEWS". To cancel, select
other than "A.F.D. STD".
• Depending on the type of DIGITAL MEDIA PORT
adapter, you may be able to operate a connected
component using either the buttons on the remote or
the control unit. The following illustration shows an
example of buttons that can be used in this case.
H
X
74
GB

Using an S-AIR Product

The system is compatible with the S-AIR
function (page 113), which allows sound
transmission between S-AIR products.
About S-AIR products
There are two types of S-AIR product.
• S-AIR main unit (control unit and subwoofer
in this system): This is for transmitting sound.
You can use up to 3 S-AIR main unit. (The
number of usable S-AIR main unit depends on
the use environment.)
• S-AIR sub unit (surround amplifier in this
system): This is for receiving sound.
– Surround amplifier: You can enjoy
– S-AIR receiver (not supplied): You can
./>
x
surround speaker sound wirelessly.
enjoy system sound in another room.
S-AIR sub unit
(S-AIR receiver,
not supplied)
S-AIR main unit (control unit
and subwoofer)
S-AIR sub unit
(surround amplifier)