Changing The Password - Sony 3-299-549-11(1) Operating Instructions Manual

10
Press X/x to select [LEVEL], then press
.
The selection items for [LEVEL] are
displayed.
11
Press X/x to select the desired level,
then press .
[PARENTAL CONTROL] setting is
complete.
The lower the value, the stricter the
limitation.
To turn off the [PARENTAL
CONTROL] function
Set [LEVEL] to [OFF] in Step 11.
To play a disc for which
[PARENTAL CONTROL] is set
1
Load the disc and press H.
The display for entering your password
appears on the TV screen.
2
Enter your 4-digit password using the
numeric buttons, then press
The system starts playback.
Note
• When you play discs which do not have the
[PARENTAL CONTROL] function, playback
cannot be limited on this system.
• Depending on the disc, you may be asked to change
the parental control level while playing the disc. In
this case, enter your password, then change the level.
If the Resume Play mode is canceled, the level returns
to the previous level.
Tip
• If you forget your password, remove the disc and
repeat steps 1 to 7 of "Restricting Playback of the
Disc" (page 86). When you are asked to enter your
password, enter "199703" using the numeric buttons,
then press . The display will ask you to enter a new
4-digit password. After you enter a new 4-digit
password, replace the disc in the control unit and
press H. When the display for entering your
password appears on the TV screen, enter your new
password.

Changing the password

1
Press FUNCTION repeatedly until
"DVD" appears in the front panel
display.
2
Press
in stop mode.
The Control Menu display appears on the
TV screen.
3
Press X/x to select
then press
The options for [SETUP] appear.
4
Press X/x to select [CUSTOM], then
press
The Setup Display appears.
5
Press X/x to select [SYSTEM SETUP],
then press
The options for [SYSTEM SETUP] appear.
6
Press X/x to select [PARENTAL
CONTROL t], then press
.
The display for entering the password
appears.
7
Enter your 4-digit password using the
numeric buttons, then press
8
Press X/x to select [CHANGE
PASSWORD t], then press
9
Enter your 4-digit password using the
numeric buttons, then press
10
Enter a new 4-digit password using the
numeric buttons, then press
11
To confirm your password, re-enter it
using the numeric buttons, then press
If you make a mistake entering
your password
Press C before you press
correct number.
DISPLAY while the system is
.
.
.
.
, then input the
[SETUP],
.
.
.
.
.
87
GB