Usingan S-Air Product - Sony DAV-HDX285 Operating Instructions Manual

Usingan S-AIR Product
The unit is compatible with the S-AIR function
(page 103), which allows sound transmission
between S-AIR products.
When you purchase the S-AIR product, you
need to perform the following settings to
establish the sound transmission.
About S-AIR products
There are two types of S-AIR products.
• S-AIR main unit (this unit): This is for
transmitting sound. You can use up to three
S-AIR main units. (The number of usable
S-AIR main units depends on the use
environment)
• S-AIR sub unit: This is for receiving sound.
- Surround amplifier: You can enjoy
surround speaker sound wirelessly.
- S-AIR receiver: You can enjoy system
sound in another room.
Room A
S-AIR main unit
,....:c<
v
S-AIR sub unit "J
(surround amplifier)
Room B _J
S-AIR sub unit
(S-AIR receiver)
m
•When you insert the wireless transmittefftransceiver,
make sure that the AC power cord (mains lead) is not
connected to a wall outlet (mains).
• Do not touch the terminals of the wireless transmitter/
transceiver.
To insert the wireless transmitter
into the unit
1
Remove the screws anddetach the slot
cover.
Rear of the unit
2
•Remove the screws from the slot cover bearing
the Calltiou mark. Do not
relilove
other screws.
• The slot cover is no longer necessary; however,
keep it after detaching.
Insert the wireless transmitter.
Rear of the unit
To make use of the S-AIR function, you need to
insert the wireless transmitter into the unit and
the wireless transceiver into the S-AIR sub unit.
•Insert the wireless transmitter with the S-AIR
logo facing up.
• Insert the wireless transmitter so that the •
marks are aligned.
74 GB