Sony 3-299-549-11(1) Operating Instructions Manual page 89

Note
• Avoid being in the measurement area and
making noise during the measurement (about 1
minute), to avoid measurement failure. During
the measurement, test signals are output from
the speakers.
• The environment of the room in which the
system is installed may affect measurements.
• If an error message appears on the TV screen,
follow the message, then select [YES].
An error message appears when:
– the headphones are connected to the surround
amplifier.
– the calibration microphone is not connected.
– front speakers are not correctly connected.
– surround speakers are not correctly
connected.
– front and surround speakers are not correctly
connected.
– subwoofer is not connected.
10
Press C/c to select [YES] or [NO], then
press .
x The measurement is OK.
Disconnect the calibration microphone,
then select [YES]. The result is
implemented.
x The measurement is not OK.
Follow the message, then select [YES] to
retry.
Note
• While the Auto Calibration function works:
– do not turn off the power.
– do not press any button.
– do not change the volume.
– do not change the function.
– do not insert or eject a disc.
– do not connect the headphones to the surround
amplifier.
– do not disconnect the calibration microphone.
• When change the surround speakers from wireless
connection to wired connection or vice versa, use
D.C.A.C. function to adjust the sound setting.
Tip
• You can check the distance between the listening
position and each speaker. See page 96.
About error messages for the
auto calibration
If the following message appears during [AUTO
CALIBRATION], check "Symptoms and
remedies" and retry the auto calibration.
Error Symptoms and remedies
message
[Check No channel sound can be detected.
calibration mic Check that the calibration
connection.] microphone is connected properly.
If the calibration microphone is
connected properly, the calibration
microphone or calibration
microphone cord may be damaged.
[Mic input level The calibration microphone or
overloaded.] system may be damaged.
Contact your Sony dealer or local
authorized Sony service facility.
[Check front Front speakers are not connected.
speaker Check that the front speakers are
connection.] connected properly (page 23).
[Check Only one surround speaker is
surround connected. Check that the surround
speaker speakers are connected properly
connection.] (page 23).
[Check front Front speakers are not connected
and surround and only one surround speaker is
speaker connected. Check that the speakers
connection.] are connected properly (page 23).
[Check Contact your Sony dealer or local
subwoofer authorized Sony service facility.
connection.]
89
GB