Start-Up Procedure - Cornelius NORDIC ELITE Series Owner's Manual

Cnm 300 lb through 1400 lb cubers

Hide thumbs

Table Of Contents

Table of Contents

NOTE: Before starting the machine, make sure the machine is level within 1/8 inch in all directions, the bin or

dispenser leg height can be adjusted by rotating the leg foot.

After verifying proper voltage, water

supply, drains and breathable air space

around the unit, press and quickly release

the ON/OFF button behind the unit front

panel. The indicator light will change from

a solid red to solid blue in color.

Follow the sequence of operation

described under "Operation of CNM

Series Cuber" in this manual. Check

operation of each component through the

cycle as explained in this section.

Bridge Thickness Adjustment

Once the unit has gone through a harvest

cycle, verify the bridge thickness (3/16"

thick for units less than 400 lbs. and 1/8"

for 400 lbs. and above) across the middle

of the ice slab on the second batch

produced. The ice thickness can be

changed on the Float Housing by turning

the adjustment clockwise to decrease the

bridge thickness and counter-clockwise

to increase the bridge thickness. You will

hear a "click" with each adjustment. It is

recommended adjustments be made one

or two "clicks" at a time.