MAGIC FX MFX1201 User Manual page 19

1
6.
1
7.
After you have set the "safety" channel,
you can set the "fire" channel. You select
the desired channel by using the UP and
DOWN buttons. If you have selected the
"Big Flame" option then you must set
two channels in this step. You can set
the
"small" flame and the "big" flame.
Press the MENU button to save each
setting.
You may select separate "fire" channels for
each Stage Flame that you have connected.
This allows you to put some variety into your
show.
At this point, you have completed all the
steps to ready the DMX so you must now
save the settings. Press the MENU button
and the message "options saved" will
appear in the window.
If you selected the "Big Flame" option then
you should have also connected both an
aerosol can and a gas bottle.
Version 1.0
Page 18