Low/High Beam Lamp Replacement - PIAGGIO Aprilia Tuono V4 1100 RR Manual

It is not necessary to remove the top fairing to replace the high / low beam light bulbs.
In the front headlight assembly there are:
•
one LED daylight running light (1);
•
two low beam light bulbs (2).
•
one high beam light bulb (3)
Front turning indicators (4) are placed on the side fairing.
04_15

Low/High beam lamp replacement (04_16, 04_17, 04_18, 04_19)

CAUTION
BEFORE REPLACING A BULB, TURN THE IGNITION SWITCH TO «KEY OFF»
AND WAIT A FEW MINUTES FOR THE BULB TO COOL OFF.
WEAR CLEAN GLOVES OR USE A CLEAN DRY CLOTH TO REPLACE THE
BULB.
DO NOT LEAVE PRINTS ON THE BULB AS THIS MAY CAUSE IT TO OVERHEAT
OR EVEN BLOW OUT. IF YOU TOUCH THE BULB WITHOUT WEARING GLOVES,
CLEAN OFF PRINTS WITH ALCOHOL TO AVOID DAMAGING THE BULB.
DO NOT FORCE ELECTRICAL CABLES.
144