Table of Contents
Advertisement
2. GENERAL OPERATION & FUNCTIONS
2.1 Precautions
This product has been designed with your safety in mind,
but please pay attention to the following warnings and
cautions before use.
Warning
Before use check the unit for cracks or any other
damage. Make sure the unit is free from dust, grease
and moisture. Also check any associated leads and
accessories for damage. Do not use if damaged. Be sure
the HPAT600 is in good working order before use.
Warning
The HPAT600 and this Instruction Manual are intended
for use by personnel who are adequately trained and
familiar with the 'IEE Code of Practice for In-service
Inspection and Testing of Electrical Equipment'.
Warning
Do not use the HPAT600 if the battery cover is not fitted.
Warning
Do not connect the HPAT600 to the mains supply via
the IEC inlet.
Warning
Use batteries of the specified type in the HPAT600.
Warning
Do not touch the appliance being tested or the test probe
tip when the HPAT600 is performing an electrical test.
Where possible, use the crocodile clip provided to attach
the probe to the appliance.
3
Advertisement
Table of Contents
