Table of Contents
Advertisement
4. MAINTENANCE
4.1 Fitting Batteries
Ensure the HPAT600 is disconnected from any
possible voltage sources and the HPAT600 is powered
off before removing the battery cover.
Do not fit non-rechargeable batteries.
Remove the battery cover of the HPAT600 by
u
unscrewing the quarter turn retaining screw.
The battery cover will now lift off.
u
Fit 6 new AA NiMH rechargeable batteries,
u
observing correct polarity.
Replace the battery cover and secure the quarter
u
turn retaining screw.
New batteries may need charging prior to use. - See
section 2.24 (Charging Batteries).
Used batteries should not be discarded with other
metal objects.
Used batteries should be disposed of in
accordance with current EU directives.
4.2 Calibration
To maintain the integrity of measurements made using
your instrument, Martindale Electric recommends
that it is returned at least once a year to an approved
Calibration Laboratory for recalibration and certification.
Martindale Electric is pleased to offer you this service.
Please contact our Service Department for details.
Email: service@martindale-electric.co.uk
Tel: 01923 650660
Advertisement
Table of Contents
