Advertisement
Step 4
Screw Cam 6 x 24mm (B) into the holes indicated on the Top (1) and both Sides (6) & (7) as shown in
the diagram below.
Step 5
Push the Plinths (2) & (3) into the pre-drilled holes on the Left Side (6), as shown in the diagram below.
Using instructions on "function of Cam and Camlock" on page 4, place the Cam (C) into the pre-drilled
holes indicated on the diagram below and tighten by turning the Camlock (C) to the right.
Page 7 of 16
Advertisement
