Advertisement
Quick Links
John Lewis
Thankyou for purchasing this Devon Wardrobe. Please read the instructions carefully
before use to ensure safe and satisfatory operation of the product.
Pre-assembly Preperation
Please ensure that instructions are read in full before attempting to assemble this product.
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of
components are given in this leaflet. If any components are missing, please contact the John
Lewis helpline.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE
CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 90 MINUITES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
If you require any additional information or have any issues with this product please call the
John Lewis helpline on 01244 689949 or email mail@fwgroup-uk.com
Page 1 of 16
Stock Code 803/61807,
803/61607, 803/61707
For product support or spare
parts please call the John Lewis
helpline;
T: 01244 489949
E: mail@fwgroup-uk.com
Advertisement
Related Manuals for John Lewis Devon Wardrobe
Summary of Contents for John Lewis Devon Wardrobe
- Page 1 John Lewis Stock Code 803/61807, 803/61607, 803/61707 Thankyou for purchasing this Devon Wardrobe. Please read the instructions carefully before use to ensure safe and satisfatory operation of the product. For product support or spare parts please call the John Lewis helpline;...
- Page 2 26pcs- Cam 6 x 24mm 1pc- Door Knob 26pcs-Camlock 15 x 10.5mm 1pc - Screw 4 x 40mm 28pcs- Dowel 8 x 30mm 36pcs- Nail 1pc- Nail Guide 20pcs- Screw 4 x 15mm 2pc- Magnet 4pcs- Screw 4 x 25mm 2cps- Strap 3pcs- Cup Hinge 4pcs- Washer...
- Page 3 Shelf 2pcs Bottom Plinth Plinth 3pcs Side left Door Back 2pcs Page 3 of 16...
- Page 4 Function of Cam and Camlock Step 3 Step 1 Step 2 Step 4 Place the Camlock Fix the Cam to the Push the wooden Tighten: turn the into the hole, arrow wooden panel panel with the attached Camlock to the right. pointing towards the Cam onto the other bolt.
- Page 5 Step 1 Knock the Dowels (D) in to the pre-drilled holes indicated on the shelf (4), Bottom (9), Plinths (2) and (3) and on the Sides (6) and (7). Page 5 of 16...
- Page 6 Step 2 Attach the Hanging Rail Cup( Q) on to the Side panels (6) & (7) using Screw (G) into the pre-drilled holes. See fig 6.1. Attach the Cross Plate (T) to the Right Side (7) using the premounted screw and 2 x Screw (G).
- Page 7 Step 4 Screw Cam 6 x 24mm (B) into the holes indicated on the Top (1) and both Sides (6) & (7) as shown in the diagram below. Step 5 Push the Plinths (2) & (3) into the pre-drilled holes on the Left Side (6), as shown in the diagram below. Using instructions on “function of Cam and Camlock”...
- Page 8 Step 6 Affix the shelf (4) and Bottom (9) onto the the Left Side (6). Using the instructions on “function of cam and camlock” on page 4, place the Camlock (C) into the pre-drilled holes indicated on the diagram below making sure that the arrows point towards the side/bolt., and tighten by turning the Camlock (C) to the right.
- Page 9 Step 8 Affix the Top (1) onto the Sides (6) & (7) Using the instructions on “function of Cam and Camlock” on page 4, place the Camlock (C) into the pre-drilled holes indicated on the diagram below making sure that the arrows point towards the side/bolt., and tighten by turning the Camlock (C) to the right. Page 9 of 16...
- Page 10 Step 9 Place the Back (8) into the rebate of the Top (1) and Left Side (7), ensuring that there is NO GAP between the side and the back, or between the top and the back. Fasten the back with Nail (F) along the top using the nail guide (H), see fig10.1, remembering the angle between the top and the bottom must be 90 degrees see fig10.2.
- Page 11 Step 10 Fix the Joining Strip (P) onto theBack Pieces (8), see fig 11.3, and the rebate on the Top (1) and the Right Side (7), see fig 11.2, remembering the angle between the top and the side must be 90 degrees, see fig 11.2, and ensuring that there is NO GAP between the side and the back or between the top and the back.
- Page 12 Step 11 Affix the Hinges (J) into the holes indicated on the Door (5) and fix them using Screws (G). Page 12 of 16...
- Page 13 Step 13 Attach the Door Knob(A) to the door using Screw(E). Place the Hanging Rail(S) into the Hanging Cup(Q), see fig13.1. Attach Door(5) to Left Side Panel(6) by placing adjustment screw on Cross Plate(T) through hole on the Cup Hinge(J) and tighten screws (G). Shut Door(5) to check alignment and reposition if necessary by repositioning screws in Cup hinge(J).
- Page 14 Step 14 Finally secure the wardrobe to the wall using Strap (K), Screw (M) and Washer (N) as shown in the diagram below. PLEASE NOTE: Wall fixings are not supplied with this product as different wall materials require different types of fixing devices. You must use fixing devices suitable for the type of wall you intend to mount this product to.
- Page 15 Wood Furniture Wood displays different grain patterns depending on which way they are cut - for example, the “medullary way” which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty of the wood. Some furniture is also deliberately aged and rustic. Wood Veneer also allows distinctive patterns to be created on flat surfaces, such as table tops and drawer fronts by the way the slivers are arranged.
- Page 16 This product complies with BS 4875 - 7:2006 & BS14749:2005 If you need any additional information or have any issues with this product please call the John Lewis helpline on 01244 689949 or email mail@fwgroup-uk.com John Lewis Partnership 171 Victory Street London SW1E 5NN www.johnlewis.com...