Advertisement
John Lewis
Devon Pod Chair
Stock number: 820/81602
Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe
and satisfactory operation of this product
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of
components is given in this leaflet. If any components are missing, please contact the retailer from whom
you bought this product.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 20 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
Read this leaflet in full before commencing assembly.
1
Advertisement
Table of Contents
Related Manuals for John Lewis Devon 820/81602
Summary of Contents for John Lewis Devon 820/81602
- Page 1 John Lewis Devon Pod Chair Stock number: 820/81602 Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product Necessary Tools Please check the pack contents before attempting to assemble this product.
- Page 2 Fittings and parts checklist 1x Pillar 1 1x Carabiner 1x Pillar 2 2x Bolt (M10*70) 1x Base 2x Spring Washer 1x Seating Pod 4x Flat Washer 1x Pin 2x Nut (M10) 1x Chain 2x Spanner...
- Page 3 Step by step assembly instructions Step One Attach Pin (E) to Pillar 1 (A). ______________________________________________________________ Step Two Attach Chain (F) to the Pin (E) Using the nut and bolt assembly which is pre-fitted to Chain (F) ____________________________________________________________________________ Step Three Assemble the support frame by inserting Pillar 1 (A) in to Pillar 2 (B), and then Pillar 2 (B) into the Base (C).
- Page 4 ______________________________________________________________ Step Four Attach Carabiner (G) to the Seating Pod (D). ______________________________________________________________ Step Five Clip the seating Pod assembled in Step Four to Chain (F). Ensure the Carabiner (G) is fully closed. The Pod Chair is now ready to use.
- Page 5 Care and Maintenance To clean the chair, simply be wipe down by hand with a damp sponge and a weak solution of soap and water. Do not use abbrasive cleaners as these will damage the synthetic wicker. Safety Instructions Never drag furniture when moving it, always lift it. Periodically check all fixings to ensure none have come loose and re-tighten where necessary.
Need help?
Do you have a question about the Devon 820/81602 and is the answer not in the manual?
Questions and answers