Advertisement
Step 2
Attach the Hanging Rail Cup( Q) on to the Side panels (6) & (7) using Screw (G) into the pre-drilled
holes. See fig 6.1. Attach the Cross Plate (T) to the Right Side (7) using the premounted screw and 2 x
Screw (G). The long end of the cross plates must point towards the front edge of the side as shown in
fig 6.2
Step 3
Attach the Magnet (l) to the Left Side (6) using Screw 4 x 15mm (G). The magnet shold be placed excatly
as shown in the diagram below.
Page 6 of 16
Advertisement
