Advertisement
Quick Links
Downton 2 Door Wide Wardrobe
Stock number: 803/06810 · 803/06910· 803/06610
Thank you for purchasing this Downton 2 Door Wide Wardrobe. Please read the instructions carefully before
use to ensure safe and satisfactory operation of this product.
For spare parts, please contact the TCH John Lewis helpdesk
On 01954 251 713
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
Necessary Tools
1
Advertisement
Related Manuals for John Lewis Downton 2 Door Wide Wardrobe
Summary of Contents for John Lewis Downton 2 Door Wide Wardrobe
- Page 1 Downton 2 Door Wide Wardrobe Stock number: 803/06810 · 803/06910· 803/06610 Thank you for purchasing this Downton 2 Door Wide Wardrobe. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. For spare parts, please contact the TCH John Lewis helpdesk...
- Page 2 Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact the number on the front of this assembly instruction. This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury or damage to the product.
- Page 3 33 x 1 x Top Fittings 1 x LHF 2 x Fittings S. Panel 10 x 1 x RHF Screws S. Panel 1 x Shelf 1 x Fitting 1 x Sham Hanging rail Adjustable Support Magnet 1 x Back 32 x panel Screws...
- Page 4 1 x Base Fittings Box 1 x Front with R & L doors Step by step assembly instructions Step One Lay parts (02) and (03) on the ground. Please place the parts on a smooth surface, in order not to scratch the paint.
- Page 5 Step Two Lay parts (01), (04) and (08) on the ground. Please place the parts on a smooth surface, in order not to scratch the paint. All fittings (A) must be screwed into the pre fitted cams on the parts (01), (04) and (08). Fittings (F) must be screwed on the shelf (04) (holes predrilled), by using a screw driver and 4 x screws (C).
- Page 6 Step Four Two persons required. Please position (02), (03), (04) and (08) parts as shown in the picture. All fittings (A) must go into prepared holes with the cam. Side panels (02), and (03) must attach to the shelf (04) and base (08) according to the arrows direction shown.
- Page 7 ________________________________________________________ Step Six Two persons required. Please attach top (01) as shown per picture. Tighten the top (01) with a screw driver. To remove the supporting door system please un-screw the middle screw as shown below. This is a 2 man job –...
- Page 8 Step Seven Please insert 1 x sham key handle (E) into the front of the door lock and secure screw from inside the door. Attach the back panel to the wardrobe, use 32 x screws (G) to tighten the panel to the wardrobe. After this is done, insert hanging rail (05) into a fitting (D), as shown on the picture.
-
Page 9: Care And Maintenance
Please be careful to retain all fittings when doing this. TCH John Lewis helpdesk on 01954 251 713 for queries regarding parts. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE John Lewis Partnership 171 Victoria Street London SW1E 5NN...