Settings; Excluded Functions - ABB ACS355 Manual

The cleaning sequence can be activated only in the manual mode of operation. The
cleaning sequence starts in the forward direction and follows the reverse direction. This
cycle repeats three times. If any intermediate fault occurs, the pump cleaning function
stops.


Settings

Parameter
6021 PMP CLEAN SELECT
6022 PMP CLEAN SPEED
6023 PMP CLEAN TIME

Excluded functions

The following features of ACS355 firmware are not supported in the solar pump inverter.
•
Timer and counter
•
Frequency input
•
Sequential programming
•
Jogging
•
Constant speed
•
IR compensation
•
Mechanical brake
Additional information
Initiates pump cleaning sequence.
Speed at which the pump cleaning sequence is initiated.
Pump cleaning time.
Program features 35