ActionTec R4500U User Manual page 38

DHCP Server Configuration
Clicking Next in the "
Configuration" screen. Change
Beginning IP Address - the IP address at which the DHCP server
starts assigning IP addresses. Actiontec recommends keeping the
factory default setting (192.168.0.2).
Ending Address - the
IP
assigning
IP
ry default settings (
The beginning and ending
Modem. If the default values are left intact, the Modem supplies a unique
address between
192.168.0.2
Note that the first three groups of numbers of the addresses are identical; this
means they are on the same subnet. The
the same subnet as the
Modem's address is changed to
IP
, and the ending
111.33.222.2
Server - the primary
DNS 1
provided
DNS
text box intact.
Server - the secondary
DNS 2
vided secondary
leave the text box intact.
Chapter 3 Using Advanced Settings
Server" screen generates the "
DHCP
address range and
IP
Address at which the
IP
addresses. Actiontec recommends keeping the facto-
192.168.0.254
addresses define the IP address range of the
IP
and
192.168.0.254
address range it generates. For instance, if the
IP
111.33.222.1
address to
IP
server provided by the
DNS
server information, enter it here. If not, leave the
provided by the
DNS
server information, enter it here. If not,
DNS
DHCP
server information here.
DNS
Server stops
DHCP
).
to each computer on its network.
address of the Modem must be on
IP
, set the beginning
.
111.33.222.254
ISP
. If the
ISP
35
Server
IP
address to
IP
. If the
ISP
pro-
ISP