Table of Contents
Advertisement
Actiontec USB/Ethernet DSL Modem User Manual
After selecting a connection type, click Next to continue configuring the connec-
tion.
Configured as a Modem
Select this option to use the Modem as a modem, connected to a single computer.
Configured as a Router - Obtain an IP Address through
Select one of these options to allow the Modem to use the Point-to-Point over
Ethernet (
) or Point-to-Point over
PPPoE
If a User Name and Password was entered during the Installation Buddy, it
should be displayed in the "Broadband Connection via
not, enter the information now. If the information is unavailable, contact the
Configured as a Router - Obtain an
Select this option (used for cable modem configurations without a Static
assigned by an
) to allow the Modem to query the
ISP
routing information. Some
Name and/or Domain Name. If this is the case, check with the
and domain name and enter them in the "Broadband Connection via
screen. If the
does not require these settings, leave the text boxes blank.
ISP
(
ATM
through
IP
s need to authenticate their end users with a Host
ISP
32
PPPoE
) protocol.
PPPoA
PPPoE/PPPoA
DHCP
and receive
ISP
for a host name
ISP
or
PPPoA
" screen. If
.
ISP
IP
address and
IP
"
DHCP
Advertisement
Table of Contents
