Table of Contents
Advertisement
Actiontec USB/Ethernet DSL Modem User Manual
8. In the next window, read the instructions, plug the smaller end of the Power Cord
into the Power Port on the back of the Modem, then click Next.
9. As shown in the next window, plug the larger end of the Power Cord into a
Power Outlet, confirm the Power Light on the front of the Modem is solid
green, then click Next.
☞
Note: Depending on the country, the picture in the previous fig-
ure may or may not reflect the type of power cord supplied.
10. The next window appears. Plug one end of the Black DSL Cable into the
Line Jack on the back of the Modem, then click Next.
14
Advertisement
Table of Contents
