Finding Pipe Lengths - Calculated Industries PIPE TRADES PRO 4095 Pocket Reference Manual


(Material)

(Weight per Foot)

(Filled Weight/Foot)

(Internal Area)

Finding Pipe Lengths

The components of rolling offset calculations
sometimes have different names in different
geographic regions and in different trades.
• Roll – the horizontal component of a rolling
offset. May also be known as "offset".
• Offset – the vertical component of a rolling
offset. May also be known as "rise" or "set".
• Bend – the bend angle, also known as "fitting
angle" or "angle of turn".
Note: If an angle is not entered, or if the angle
is set to 0 degrees, the fitting angle is assumed
to be 90º.
Find the pipe Cutback when you are running
pipes through a 45º bend with a 10" offset.
KEYSTROKES
 
  
   
 
P
OCKET
PIPE SIZE 10.2528
FILL SIZE 13.11634
AREA SIZE 6.605199
R
EFERENCE
MATL SIZE STEEL
OFST 10
CUT 4 1/8
G — 29
UIDE
LB Per FEET
LB Per FEET
SQ INCH
DISPLAY
0.
/0 45.00 º
INCH
INCH