Please read this instruction manual before using your new power tool. 1. Application Your heat gun has been designed for stripping paint, soldering pipes, shrinking PVC, welding and bending plastic as well as general drying and thawing purposes. WARNING! Read this manual and general safety Instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions.
4. General Power Tool Safety Warnings Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. 4.1 Work Area •...
5. Additional Safety Instructions for Heat Guns • Do not place your hand over the air vents or block the vents in any way. • The nozzle and accessories of this tool become extremely hot during use. Let these parts cool down before touching. •...
Page 5
Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. 6.2 Mounting the Correct Accessory • Icon • Description •...
Page 6
7. Instructions for Use • Always observe the safety instructions and applicable regulations. • Use only one hand to hold the tool, do not place your other hand over the air vents • Prior to operation: • Mount the correct accessory for the application. •...
Page 7
Persons removing paint should follow these guidelines: Move the work piece outdoors. If this is not possible, keep the work area well ventilated. Open the windows and put an exhaust fan in one of them. Be sure the fan is moving the air from inside to outside. Remove or cover any carpets, rugs, furniture, clothing, cooking utensils and air ducts.
7.4 Stationary Use This tool can also be used in stationary mode. • Place the tool onto the workbench. • Secure the cable to prevent pulling the tool off the workbench. • Carefully switch the tool on. Make sure that the nozzle always points away from you and any bystanders. Make sure not to drop anything into the nozzle.
9. Technical Data • Voltage • 120 V ~ 60Hz • Power supply • 1,500 W • Air temperature / Flow • I. 50-450°C: 300L/min • II. 90-600°C; 500L/min 10. Environment • Should your appliance need replacement after extended use, do not discard it with the household rubbish but dispose of it in an environmentally safe way.
Need help?
Do you have a question about the JHG-600K and is the answer not in the manual?
Questions and answers