Firmware - Gigaset N670 IP PRO Installation, Configuration And Operation

System settings
Date and time are synchronised system-wide on the base station and all handsets. It
can take up to one hour until the manually changed time is visible on every handset.
Synchronisation is carried out in the following cases:
•
If a handset is registered to the telephone system.
•
If a handset is switched off and switched back on again, or is outside the wireless
range of the telephone system for more than 45 seconds and then comes back
into range.
•
Automatically every night at 4.00 am.
You can change the date and time on the handset. This setting only applies for that
handset and will be overwritten when the next synchronisation takes place.
The date and time are displayed in the format set for that handset.

Firmware

Use this page to make adjustments in order to keep the phone system up-to-date via firmware
updates.
It is only available for the user role admin.
Regular updates to the firmware are provided by the operator or supplier on a configuration
server. You can upload these updates onto the device as required. If a firmware update is
provided in the form of an update file, you can store it on your computer and download it from
there.
¤
Settings System
Current version
Shows the current firmware version.
Backup available for previous version
You can downgrade the firmware by installing any older version. When installing a new firmware
the system automatically creates a data backup for the recent firmware. If you later downgrade
to this version the data backup will be installed on the system. This way you have a downgrade
to previous firmware version and data settings.
Downgrade to any other version will reset the device to factory settings.
52
Firmware