Accepting Calls - Gigaset N670 IP PRO Installation, Configuration And Operation

Dialling from the redial list
The redial list contains the numbers last dialled with the handset.
¤
Briefly press the Talk key
Press the Talk key
Dialling from the call list
The call lists contain the most recent accepted, outgoing and missed calls.
¤
. . . use
to select an entry
The Missed calls list can also be opened by pressing the Message key
Initiating ringback
If the number you have called is engaged or the participant called does not reply, you can
arrange a ringback if your PBX/provider supports the CCBS and CCNR services.
CCBS (Completion of Call to busy Subscriber)
CCNR (Completion of Calls on No Reply)
The service code for activating/deactivating CCBS, CCNR must be configured with the provider
¢
settings ( page 24).
Activating ringback:
¤
Enter the service code defined for the PBX/provider, e.g., *6
If you decide you do not want a ringback, you can switch the function off again:
¤
Enter the service code defined for the PBX/provider, e.g., #6

Accepting calls

Incoming calls for the connection assigned to your handset are signalled.
¤
Press the Talk key
Switch off ringtone:
Reject a call:
Information about the caller
The caller's phone number is displayed, if provided. If the caller's number is saved in the direc-
tory, the name is displayed.
Using a PBX call manager
In case a PBX call manager is used it is possible to define that incoming calls are accepted directly
via headset or handsfree. This has to be configured for the handset via web configurator in the
Call manager section (
. . . the redial list is opened
to select Call Lists
Press the Talk key
to accept the call.
¤
Silence . . . the call can be accepted for as long as it is shown on the
display
¤
Press the End call key
¢
page 31).
Using a handset connected to an N670 IP PRO base
OK . . . use
Ringback if busy
Ringback if no answer
. . . use to select an entry
to select a list OK
.
. . . use
65