Integration Of Tank Sensors - Endress+Hauser Proservo NMS81 Technical Information

Integration of tank sensors

6
In addition to measuring the level, interfaces, tank bottom, and density, the device can also be used
to integrate of tank sensors into tank inventory systems. All measured and calculated values can be
displayed on the built-in display. They can be transferred to an inventory control system via a field
communication protocol.
A
HART
HART
1
 2 Measuring system
A HART multidrop mode
B HART and analog mode
1 Pressure transmitter
2 Average temperature transmitter (NMT53x)
3 Proservo NMS8x
4 Field protocol transmits data to an inventory control system
Typical values measured by the sensors are:
• Level
• Spot temperature
• Average temperature
• Water level
• Pressure
• Secondary level value (for critical applications)
Major applications
The number of measuring functions and output options, as well as the compact design, enables
NMS8x to be installed in a wide range of applications at minimal cost.
Petroleum industry
From oil production to storage at an oil depot, there exists an extensive need to measure and
manage a wide variety of products. Remote tank gauging by NMS8x combined with an inventory
management system is an ideal way to measure and manage tank contents.
Chemical industry
A wide choice of options for the wetted parts ensures chemical compatibility and long product life.
Power plant
Fuel oil levels are major applications where precise measurement is required to ensure safe
operation.
3
2
4
1
Proservo NMS81
B
4...20mA
HART
3
2
Endress+Hauser
4
A0026722