Programmable Functions; Choosing And Selecting A Programmable Function - Miele WDD 020 EcoPlus&Comfort Operating Instructions Manual

The programmable functions are used
to alter the machine's electronics to
suit changing requirements.
Programmable functions can be
altered at any time.
The programming is carried out in eight
steps (, ,  ... ) using the sensor
controls.
Accessing the programming level
Pre-requisites:
– The washing machine is switched on
(the programme selector is pointing
to a wash programme).
– The washing machine door is open.
 Touch the Start/Stop sensor and
leave your finger on it whilst carrying
out steps -.
 Close the washing machine door.
Wait until the Start/Stop sensor lights
up constantly ...
 ... and then take your finger off the
Start/Stop sensor.
After approx. four seconds,  will light
up in the time display.

Programmable functions

Choosing and selecting a
programmable function
The number of the programmable
function will appear in the time display
as  and a number: e.g. .
 Touch the  or  sensor to scroll to
the next or previous programmable
function:
Programmable functions

Keypad tone

Lock code
 Control panel standby status
 Memory
 Additional pre-wash time -
Cottons
 Soak duration
 Gentle action
 Reduced temperature
 Water plus
 Water plus level

Maximum rinse level

Suds cooling
 Anti-crease
 Backlight brightness
 Confirm the selected programmable
function by pressing the Start/Stop
sensor.
71