Building Under A Continuous Worktop/ In A Kitchen Run; Washer-Dryer Stack - Miele WDD 020 EcoPlus&Comfort Operating Instructions Manual

Installation and connection
Building under a continuous
worktop/ in a kitchen run
Building under kits* must only be
installed/dismantled by a suitably
qualified fitter in accordance with the
instructions supplied.
– A special building under kit* with a
cover plate to replace the machine lid
is required. It must be fitted by a
suitably qualified fitter to ensure
electrical safety. N.B. If there is space
to push the washing machine under
the worktop without removing the lid,
the building under kit is not
necessary. Otherwise it is essential.
– Connections for electricity, water and
drainage should be installed in such a
way that they remain accessible
when the machine is in its final
position.
Fitting instructions are supplied with the
conversion kit.
64

Washer-dryer stack

The washing machine can be combined
with a Miele tumble dryer in a washer-
dryer stack. The appropriate "WTV"
stacking kit* to match your dryer is
required.
All parts marked* are available from
your Dealer or Miele.
Please note:
a = at least 2 cm
b = WTV without drawer: 172 cm
WTV with drawer: 181 cm
c = 64 cm