Table of Contents
Advertisement
Reduce temperature
The boiling point for water is lower at
high altitudes. In order to avoid water
boiling, Miele recommend activating
the reduce temperature setting at
altitudes of more than 2000 m above
sea level. The maximum temperature
is reduced to 80 °C even when a
higher temperature is selected.
Options
= The reduce temperature setting
is switched off (factory default
setting)
= The reduce temperature setting
is turned on
Water plus
You can determine the amount of
water used if the Water plus extra is
selected.
Options
= More water is used in the wash
and rinse stages (factory
default setting)
= An extra rinse is carried out
= The water level is increased in
the wash and rinse stages and
an additional rinse is carried
out
Programmable functions
Water plus level
There are three different water levels
which can be selected by activating
the Water plus extra.
Options
= No higher water level (factory
default setting)
= Water level increase by 1 level
when washing and rinsing
= Water level increase by 2 levels
when washing and rinsing
= Water level increase by 3 levels
when washing and rinsing
Maximum rinse level
The water level in the rinse cycle can
be permanently set to the highest
value.
This function is useful for allergy
sufferers as it achieves an excellent
rinse result. Water consumption will
increase.
Options
= Maximum rinse level is
switched off (factory default
setting)
= Maximum rinse level is
switched on
75
Hide quick links:
Advertisement
Table of Contents
