Changing The Programme Sequence; Changing A Programme; Cancelling A Programme; Interrupting A Programme - Miele WDD 020 EcoPlus&Comfort Operating Instructions Manual

Changing the programme sequence

Changing a programme

After the successful start of a
programme it is no longer possible to
change the programme.
If you would like to change the
programme, you have to cancel the
programme.

Cancelling a programme

You can cancel a wash programme at
any time after it has started.
 Touch and hold the Start/Stop sensor
until the time display switches to
:.
The water will be pumped away. As
soon as the  symbol in the control
panel goes out, the programme has
been cancelled.
 Open the door.
Selecting a different programme after
cancelling the programme
 Close the door.
 Check that there is still detergent in
the dispenser drawer. Add more
detergent if necessary.
 Turn the programme selector to the
programme you want and start it by
pressing the Start/Stop sensor.
38
Removing laundry after cancelling
the programme
If you want to remove the laundry when
it is dripping wet:
 Open the door.
 Remove the laundry.
If you want to remove the laundry after
it has been spun (damp):
 Open the door.
 Close the door.
 Turn the programme selector to
Drain/Spin.
Tip: Select an appropriate spin speed.

Interrupting a programme

 Turn the programme selector to the
 position.
The washing machine switches off.
 To continue: turn the programme
selector to the position of the wash
programme that was started.
Tip: If  appears in the time display,
the programme selector is in the
incorrect position.