Two Vcrs For Tape Editing - Sony WEGA KDE-50XS955, KDE-37XS955, KDE-42XS955 Operating Instructions Manual

Two VCRs for Tape
Editing
Playback VCR
34
Connecting two VCRs lets you record from one VCR to the other. By
connecting them as shown below, you can view (monitor) what is being
recorded.
To connect two VCRs for tape editing
1
Use an A/V cable to connect the playback VCR's A/V output jacks to
the recording VCR's A/V input jacks.
2
Use an A/V cable to connect the recording VCR's A/V output jacks to
the TV's A/V input jacks (VIDEO 1 or 3).
Using S VIDEO jacks? See page 29.
A/V cable
When connecting two VCRs for tape editing;
– you cannot edit a tape with copy protection.
– do not connect the TV's A/V input jack and output jack to
your VCRs at the same time to avoid looping the signal.
Rear of TV
R-AUDIO -L
( MONO )
Recording VCR
A/V cable
VIDEO IN
1
3
VIDEO S VIDEO