Removing The Cablecard - Sony WEGA KDE-50XS955, KDE-37XS955, KDE-42XS955 Operating Instructions Manual

z You can also access
information about your
™
CableCARD in the
Applications Menu (see
page 108).
Removing the
™
CableCARD
52
KDE-50XS955
CAUTION: Inserting the CableCARD
damage to the card and the TV.
3
Gently push the card into the slot until it locks into place.
4
Turn on the TV. After 1-2 minutes, the CableCARD
displayed. This screen includes information your cable TV company
will request before they can activate your service.
5
Follow the displayed instructions: Phone your cable TV company. A
representative will guide you through the activation process.
6
After your CableCARD
download the service information, including the channel list, to the
™
CableCARD .
After the CableCARD
company, the TV tunes to the lowest available channel.
In the event you want to cancel your service, contact your cable TV
company.
Once the CableCARD
decrypt digital cable TV programming services that require
™
CableCARD .
1
Turn off the TV.
2
Push the eject button on the TV's CableCARD
Eject button
3
Pull the CableCARD
To install a different CableCARD
™
CableCARD Service" on page 51.
™
incorrectly may result in permanent
™
is activated, your cable TV company will
™
has acquired channels from your cable TV
™
is removed, your TV will no longer
™
straight out of the slot to remove it.
™
, follow the instructions in "Activating
™
setup screen is
™
slot to release the card.